Field noteUse compression BNCs, not twist-on; the car vibrates and twist-ons walk loose.
Field noteRun 12 V from a supply in the machine room only if the drop over the loop stays under 10 %; otherwise power the camera from the car controller.
CHANNELTECHFRLSFLAT · FLEXIBLEMOST POPULAR

2+2 Flat HD camera lift cable

CC-9511K-90 · 90 m coil pairs

Two multi-strand tinned-copper video cores and two multi-strand copper power cores in a black, flexible FRLS PVC flat jacket. One pull for a DVR camera in the lift: video down, 12 V up.

UseHD-TVI, AHD, HD-CVI and analog (DVR) cameras — two video cores and two power cores in one flat cable. HD / analog camera: video + 12 V DC in one cable.
Enquire / get a quoteWhatsApp
Request datasheet
Cable type2 video + 2 power, flat
Video coresMulti-strand tinned copper, LDPE insulated
Outer sheathSpecial flexible FRLS PVC, black
ProfileFlat
Fire performanceFRLS (flame retardant, low smoke)
Packing90 m coil pairs
TECHNICAL DATA

CC-9511K-90 specification

Construction as per the Channeltech catalogue. The full technical datasheet for this part code is issued on request — ask on WhatsApp and we send it the same day.

Construction

Cable type2 video + 2 power, flat
Video coresMulti-strand tinned copper, LDPE insulated
Power coresMulti-strand copper
Outer sheathSpecial flexible FRLS PVC, black
ProfileFlat

Mechanical & packing

Fire performanceFRLS (flame retardant, low smoke)
Packing90 m coil pairs
DatasheetFull TDS on request
QUESTIONS

CC-9511K-90 — questions

What is CC-9511K-90?

CC-9511K-90 is the Channeltech 2+2 Flat lift cable: two multi-strand tinned-copper video cores with LDPE insulation and two multi-strand copper power cores, in a black flexible FRLS PVC flat jacket. It carries an HD or analog camera's video and its 12 V supply in one cable.

Which cameras does it suit?

HD-TVI, AHD, HD-CVI and older analog cameras — anything that plugs into a DVR with a BNC. For IP cameras that connect to an NVR, use the CAT6 Flat 4 Pair, CC-8251G-90.

Why two video cores?

One is normally enough for a single camera; the second gives you a spare, or a second camera in the car, without pulling another cable. Two power cores carry the 12 V DC to the camera.

Why tinned copper on the video cores?

Tinning protects the fine strands from oxidation over years of flexing and humidity in the shaft, which keeps the video path low-loss and the BNC joints reliable.

ENQUIRE

CC-9511K-90 — quantity and delivery

Tell us the number of lifts and the travel height; we confirm coil pairs, stock and delivery. No prices are published — the list tracks copper.

WhatsApp instead

Mon–Sat, 10 am – 7 pm IST · we reply within one working hour

WhatsApp