Field noteKeep the intercom on its own cable so a camera fault never takes out the emergency phone.
Field noteTerminate on screw terminals or ferrules — the strands are fine, so do not push bare strands into spring clamps.
CHANNELTECHFRLSFLAT · FLEXIBLE

CAT6 Flat 2 Pair intercom lift cable

CC-4251G-90 · 90 m coil pairs

A two-pair version of the flat travelling cable in a soft-grade FRLS PVC jacket, for lift intercoms, emergency phones and simple signalling. Not intended as a data cable for cameras.

UseLift intercoms, emergency telephones and alarm circuits — two twisted pairs, no camera. Voice and signalling only — not for IP cameras.
Enquire / get a quoteWhatsApp
Request datasheet
Cable type2 twisted pairs, flat
ConductorMulti-strand copper
Outer sheathFRLS PVC, soft grade, grey
ProfileFlat
Fire performanceFRLS (flame retardant, low smoke)
Packing90 m coil pairs
TECHNICAL DATA

CC-4251G-90 specification

Construction as per the Channeltech catalogue. The full technical datasheet for this part code is issued on request — ask on WhatsApp and we send it the same day.

Construction

Cable type2 twisted pairs, flat
ConductorMulti-strand copper
Outer sheathFRLS PVC, soft grade, grey
ProfileFlat

Mechanical & packing

Fire performanceFRLS (flame retardant, low smoke)
Packing90 m coil pairs
DatasheetFull TDS on request
QUESTIONS

CC-4251G-90 — questions

What is CC-4251G-90?

CC-4251G-90 is the Channeltech CAT6 Flat 2 Pair lift cable: two multi-strand twisted pairs in a soft-grade FRLS PVC flat jacket. It is made for lift intercoms, emergency telephones and alarm signalling in the shaft.

Can I run an IP camera on the 2-pair cable?

No. An IP camera needs four pairs for data plus PoE (two pairs minimum for 100BASE-TX, and PoE over the spare pairs or the data pairs). Use CC-8251G-90 for cameras and keep the 2-pair cable for the intercom.

Why is it called CAT6 if it is only two pairs?

The pairs are built to CAT6 twist and conductor practice, which keeps voice clean and rejects noise from the lift drive. The name tells the lift company what construction to expect; it is not a four-pair data cable.

Can I run the intercom and the camera in one cable?

Yes, if you use the 4-pair cable and dedicate one pair to the intercom — but most lift companies prefer the intercom on its own cable so a camera fault never takes out the emergency phone. That is what the 2-pair cable is for.

ENQUIRE

CC-4251G-90 — quantity and delivery

Tell us the number of lifts and the travel height; we confirm coil pairs, stock and delivery. No prices are published — the list tracks copper.

WhatsApp instead

Mon–Sat, 10 am – 7 pm IST · we reply within one working hour

WhatsApp